Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manual de usuario descargar pdf (Pagina 50)

Cut to Length with Multi Stroke Program

then pressing the F3 key will display the following screen.

START AUTOMATIC FROM

F1=SEQUENCE NUMBER 1

F2=PREVIOUS SEQUENCE

AND REPEATS POSITION

After selecting one of the above choices the following screen appears.

SELECT CONTINUOUS OR

BATCH CYCLE F1=BATCH

F2=CONTINUOUS CYCLE

F4=EXIT TO MAIN MENU

F1=BATCH

If the F1 key was pressed then the servo will be in the auto batch mode and

the following screen appears.

BATCH SETTING=000000

file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (49 of 66) [12/10/2001 3:44:58 PM]

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Sin comentarios

Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manual de usuario Pagina 50